Beijingloading

1. Acard Hard Disk Controller Driver Download Windows 10
2. Acard Hard Disk Controller Driver Download 64-bit
3. Acard Hard Disk Controller Driver Download

Ashwani Tiwari | Modified: November 9th, 2020 | Windows Error

“I have a desktop that I added PCI based raid controller card as well. The BIOS displays the card and I was able to configure Raid 1 without any issue. But when I try to install Windows I got an error message “Windows cannot be installed to disk. This system hardware may not support booting to a disk. Ensure the disk controller is enabled in the computer’s BIOS Menu.”

So, could you please help me to fix the issue of how to enable the disk controller in the computer bios menu? Your help would be greatly appreciated.”

Download Drivers for SATA AHCI Controller for Windows 10 By now you must know the importance of SATA AHCI Controllers in your computer. And the drivers for this controller are equally important as they provide communication between Windows 10 and the actual controller on your computer’s motherboard itself. That’s hard to detected which physical disk is Device Harddisk5 DR5, as I said the number should be USB controller ID, like USB port number. If you want to determine which HD was broken, you should unplug all necessary hardware first(DVD ROM, Printer), and test the harddisk one by one. Note that all hard disk controllers provide hard disk status information in single/standalone mode only unless RAID mode is listed for the appropriate hard disk controller (RAID controller). Note: the firmware update for ASMedia ASM1051 USB3.0 bridge may work with enclosures, adapters based on this chip to get the missing status information.

Are you still facing the same issue? Not able to understand what to do and how to enable the disk controller in the BIOS menu? Do not worry, you are landed on the right page. In this blog, we will discuss different ways to enable the disk’s controller in BIOS menu.

Expert Suggestion:
In case of data loss, try out this utility:

Manual Way to Enable Disk Controller in BIOS

Acard Hard Disk Controller Driver Download Windows 10

There are multiple ways to enable AHCI mode for SATA on PC where Windows is already installed, and Windows that normally run after this operation. Please have a look on steps to solve your query on how to enable disk controller in bios menu windows 10:

• First of all, run the Registry Editor
• For this, press Windows + R and type regedit in the command line box
• Go to this section HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorV
• Double-click on Start icon and set its value to zero (0)
• In the upcoming section, HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorAV StartOverride set zero value for element 0
• In this section, HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services storahci set some values to zero for Start element.
• In the next subsection, HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services storahci StartOverride set zero value for element 0.
• In this case, there is nothing to be seen, but you can see, if AHCI may not be enabled yet.
• Close the Registry Editor
• Restart the system and go to BIOS or UEFI. For the first time after a restart, it is always better to boot Windows in safe mode
• In BIOS or UEFI, find SATA settings to choose the particular mode for memory devices. Switch all of them to AHCI, save settings and restart the PC
• After restarting, Windows can start the installation of SATA drivers, and when it gets over, it will ask for another restart. To do so, users will enable the AHCI mode in Windows. (If the above method does not work properly, here is another solution. To initiate with, if users have problems with booting Windows in AHCI mode, return to IDE and restart the desktop, After doing this:)

• Start the Command promptas an Administrator
• Type “bcdedit /set {current} safeboot minimal” in the command prompt and press Enter key
• After getting a message that the operation successfully completed, restart the computer system
• Before booting the system, enable the disk controller in BIOS or UEFI using the above method and save the settings
• The PC will only boot up in safe mode and install all required drivers.
• Again, launch Command prompt as Administrator and type in bcdedit /deletevalue {current} safeboot
• Once the command is executed, restart the PC again. This time, Windows needs to boot with AHCI enabled and without any restrictions.

Well, these instructions can theoretically result in unintended consequences like the inability to start the operating system. Moreover, this method requires technical skills and knowledge to accomplish the task. Here you have got the solution for your query How do I enable disk’s controller in the BIOS menu?

Data Loss Solution!!

There might be an instance, wherein the drive gets corrupt or format while enabling the disk controller in BIOS. Therefore, to resolve all such issues, one can use Computer Data Recovery Software. It is a simple and reliable solution, which helps to recover all deleted files from the HDD. It is not the solution for your main concern on how to enable disk controller in the computer bios menu Windows 10, 8, 7 and brands Asus, Acer, Sony Vaio, Dell, Samsung etc.

Acard Hard Disk Controller Driver Download 64-bit

Time to Conclude

Acard Hard Disk Controller Driver Download

At certain times, some users fail to enable disk controller in BIOS. This situation occurs due to several reasons. Therefore, in this blog, we have discussed a manual procedure to enable the disk’s controller in the BIOS menu. Else, users can opt for a reliable third-party tool, listed above. Mainly focused on steps to enable disk controller in bios menu Sony Vaio, Asus, Acer, Dell, Samsung in Windows 10, 8, 7 etc.